The Copper rod horizontal Continuous Casting Machine is a melting and holding furnace with a cooler, together with graphite die and cooler assembly and run out track with withdrawal machine and cut-off device. Molten copper flows from the crucible into the graphite casting die which is cooled with the help of a highly efficient cooling jacket. Water-cooled graphite dies are attached horizontally to the holding crucible. During the continuous casting operation copper flows into the graphite casting die where it solidifies. The solidified strands are intermittently withdrawn by the withdrawal equipment.
Continuous casting unit for copper rod Products and capacity
Copper rod flat continuous casting unit
Horizontal continuous casting unit for copper rod
Tube length or coil
5~25m or1.5~2.0t/ coil
Up to 20,000t/a
1~2 per shift
The continuous casting machines are used for the manufacture of copper alloy, brass, bronze and zinc bars, tubes, sections, strip, brass rod, brass forging rod etc.
Melting furnace is vertical structure and welded by steel plate, and the furnace consists of furnace body, inductor, tilting furnace system, electrical control. and about the Holding furnace, which is used for thermal insulation and traction. The holding furnace can be used separately, also can be used with melting furnace together.
Distance between two wheels can be adjusted; available For dimension 10-65mm copper; Adjustable tracting speed; To tract the copper straightly, improving the production and quality.
Titighen the copper both the vertical and horizontal direction; High cutting efficiency and precision; Automative collection of the cutting slag; Low-voltage on the control cabinet for safe operation.
Hydraulic motivation for sending; Widely use for pipe, bar, flat, and irregular metal.